@0001 About ..
@0002 About Unfold3D
@0003 License
@0004 License of Unfold3D
@0005 Mesh Informations
@0006 Show informations
@0007 Load OBJ...
@0008 Load OBJ file
@0009 Load OBJ UV...
@0010 Load OBJ file using UVs texture connectivity
@0011 Load OBJ UV + Merge...
@0012 Load OBJ file using UVs texture connectivity and merging it
@0013 Save OBJ As...
@0014 Save OBJ
@0015 Save OBJ 3D As....
@0016 Save textures coordinates into 3d coordinates
@0017 Quit
@0018 Quit this program
@0019 Prepare
@0020 Smooth 3D mesh to facilitate the unfolding task
@0021 Prepare N times
@0022 Smooth with N iterations
@0023 Auto unfolding
@0024 Automatic Unfolding of mesh
@0025 Manual unfolding
@0026 Stop unfolding when the number of iterations is reached
@0027 Reset
@0028 Recovery of loading state of mesh
@0029 Best iteration
@0030 Recovery of the best iteration
@0031 Adjust
@0032 Surface adjustment
@0033 Settings...
@0034 Setting of calculation accurary of surface adjustment
@0035 Import UV coordinates
@0036 Import UV coordinates present in original 3D file 
@0037 Files
@0038 Unfold
@0039 Adjust
@0040 ?
@0041 Unfold3D is ready
@0042 Task
@0043 Parameter(s)
@0044 State
@0045 Load
@0046 Load OBJ
@0047 Save
@0048 Save
@0049 Load cuv
@0050 Load OBJ texture connectivity
@0051 Load cuvfusion
@0052 Load OBJ texture connectivity +Merge
@0053 Unfolding
@0054 Automatic unfolding
@0055 Stop
@0056 Stop of calculation in progress
@0057 Undo
@0058 Undo
@0059 Smoothing
@0060 Smoothing
@0061 Best
@0062 UNUSED
@0063 Surface adjustment
@0064 Surface adjustment
@0065 Fine grid
@0066 Setting of accurate adjustment (slow)
@0067 Normal Grid
@0068 Setting of normal adjustment 
@0069 Coarse grid
@0070 Setting of coarse adjustment (fast)
@0071 User grid
@0072 Setting of surface adjustment
@0073 Import UV
@0074 Import UV coordinates
@0075 Upgrade
@0076 Upgrade
@0077 This software is subjected to copyrights,
@0078 Unfold3D is a trade mark.
@0079 License number : 
@0080 About Unfold3D
@0081 Mesh invalid 
@0082 One of the openings has at least two points with the same coordinates.
@0083 One of the polygons has two superimposed points.
@0084 One of the polygons has got the same point twice.
@0085 One of the edges divides more than two polygons.
@0086 One of the polygons has a too small or a too large angle (have a look to more then 4 points polygons).
@0087 Mesh has got a butterfly point. Please try to find those points and remove them in your 3d software.
@0088 One of the points is not connected to the remainder of mesh. Please try to find those points and remove them in your 3d software.
@0089 Mesh is divided into several parts.
@0090 Mesh has not got any opening. Please add some cutting lines on it.
@0091 Mesh has got too many triangles for the installed version.
@0092 Unknown error.
@0093 Loading of OBJ file.
@0094 Saving OBJ file.
@0095 Saving OBJ file (3D list).
@0096 Interruption of calculation asked for by user.
@0097 Waiting for next Island...
@0098 Enter the iteration number for unfolding
@0099 Manual unfolding
@0100 Enter number of smoothing iterations
@0101 Smoothing
@0102 p < 1 = accurate adjustment, p > 1 = coarse adjustment
@0103 Setting accuracy of surface adjustment
@0104 Valid mesh (1) yes (0) no = 
@0105 Number of triangles = 
@0106 Number of points = 
@0107 No mesh loaded ...
@0108 To get a more powerful version (surface adjustment) and unlimited number of polygons, visit the web site :
@0109 Information on the Studio version of Unfold3D
@0110 License file not found :
@0111 License
@0112 Validate
#@0113 UNUSED
@0114 Setting of adjustment accuracy. Value: 
@0115 Looking for new settings.
@0116 Computaion stopped by user.
@0117 Surface adjustment in progress...
@0118 Automatic unfolding in progress...
@0119 Iteration 
@0120 : valid.
@0121 : readjustment.
@0122 The unfolding is not finished. Reset mesh and apply several smoothing before starting again the calculation of unfolding
@0123 Maximum number of iterations reached
@0124 Maximum number of iterations reached.
@0125 Reset mesh and apply several soothings before starting again the calculation of unfolding. 
@0126 Manual unfolding in progress...
@0127 Mesh reset.
@0128 UV coordinates imported.
@0129 Loading file :
@0130 File loading failed or was canceled.
@0131 Testing and preparing mesh (This can take some while)...
@0132 Invalid mesh.
@0133 Valid mesh.
@0134 Saving in file 
@0135 Saving 3D coordinates in file 
@0136 Mesh is not valid. Please load a rules compliant mesh.
@0137 No mesh loaded !
@0138 The number of textures points is not valid.
@0139 Mesh was not loaded using textures points connectivity. Please use the loading pattern which uses textures points connectivity. 
@0140 Error
@0141 Waiting ...
@0142 In progress...
@0143 Finished
@0144 Canceled
@0145 Failure
@0146 Stopped
@0147 Unfolding
@0148 Unfold-Pack
@0149 Smoothing (unused)
@0150 Adjustment
@0151 Recovery
@0152 UVs Import
@0153 Reset
@0154 Loading and testing
@0155 Saving
@0156 Setting of accuracy
@0157 Parameter settings
@0158 Activation key is not present.
@0159 Activation key is valid.
@0160 Activation key is not valid.
@0161 Key request
@0162 License number
@0163 Unfold Code
@0164 Key
@0165 To get your key:
@0166 http://www.unfold3d.com/key.htm
@0167 Validate
@0168 Cancel
@0169 The mesh has a singular geometry. Unfolding phase has failed. Try another cutting line.
@0170 Not enough memory.
@0171 Internal error. Sorry.
@0172 Pack
@0173 Packing...
@0174 Positioning sub meshes on best places
@0175 Exporting infos
@0176 Island number 
@0177 Preferences...
@0178 Global settings of Unfold3D
@0179 Save Preferences
@0180 Save almost all settings of Unfold3D
@0181 Islands positioning
@0182 Export mesh infos 
@0183 Export bunch of data in a file (Errors, min max stretching etc...) 
@0184 Tools
@0185 Texture size factor
@0186 Packing settings
@0187 Select file to put infos in
@0188 Cannot saving pref file : 
@0189 . You must have writing privileges in Unfold3D install directory to do this.
@0190 Unfold3D settings
@0191 Unfolding prefs
@0192 Display mesh for each Island
@0193 Stop if unfolding task fail for one Island
@0194 Add a packing task after an unfolding task
@0195 Add a packing task after an surface adjustement task
@0196 Max number of auto-unfold iteration
@0197 Set
@0198 Cancel
@0199 Island order
@0200 Increasing in size
@0201 Decreasing in size
@0202 Random order
@0203 Random seed
@0204 Island positioning
@0205 Spacing between Islands (in % of total width)
@0206 Positioning accuracy (in % of total width)
@0207 Island orientation
@0208 Rotation offset (in degrees)
@0209 Optimal orientation accuracy (in degrees)
@0210 (360 or 0 to disable)
@0211 Post operations
@0212 Global UV layout rotation (in degrees)
@0213 Square fitting (Warning : make stretching data ambiguous) 
@0214 Pack !
@0215 Cancel
@0216 Post operations
@0217 File suffix when saving (e.g myfile_SUFFIX_.obj)
#@0218 UNUSED 
@0219 Number of auto smooth iteration (then unfold again)
@0220 The obj file use the "relative vertex numbering mode", which is incompatible with Unfold3D, try to switch to the "absolute vertex numbering mode". Loading fail.
@0221 Edit
@0222 Cut Mesh
@0223 Use edge selection to cut out the mesh.
@0224 Undo
@0225 Redo
@0226 cut mesh
@0227 Selection
@0228 Loop done
@0229 Propagation stopped on previously selected edge
@0230 Propagation stopped on frontier
@0231 Target edge found
@0232 Propagation stopped on star point
@0233 Propagation stopped on angular point
@0234 UNUSED
@0235 Clear selection (space bar)
@0236 Shortest path selection mode 
@0237 Rectangle selection tool mode 
@0238 Line selection mode 
@0239 Stop selection propagation on star vertice (On/Off)
@0240 Selection propagation turn only on star vertice (On/Off) (Effective with shortest path mode)
@0241 Stop selection propagation when angle > value
@0242 Edge selection propagation don't stop on star vertice
@0243 Edge selection propagation stop on star vertice
@0244 UNUSED
@0245 UNUSED
@0246 View centered on last edge selection
@0247 UNUSED
@0248 Clear selection 
@0249 UNUSED
@0250 UNUSED
@0251 Edge to Edge sel 
@0252 Turn on/off light
@0253 Center view on last highlighted edge (F)
@0254 Do not forget to visit "Edit->Mouse Bindings..." to choose your mouse preferences.
@0255 On that version, you cannot do cutting lines which separate your mesh in several parts.
@0256 Unfold3D has failed to unwrap this part of the mesh. Try to smooth it or add seams on it please.
@0257  
@0258  
@0259  
@0260  
#@0257 add LEFTMOUSE to select highlighted edge, use ALT+LEFTMOUSE to select "shortest path"
#@0258 add LEFTMOUSE to select highlighted edge, use ALT+LEFTMOUSE to select "loop path"
#@0259 add LEFTMOUSE to select highlighted edge path, use SHIFT+LEFTMOUSE to select a "new start edge" 
#@0260 add LEFTMOUSE to select highlighted edge path, use SHIFT+LEFTMOUSE to simply select edge 
@0261 Reload
@0262 Reset 3D coords
@0263 Paste 3D coordinates to UVs coordinate
@0264 Comments
@0265 Paste 3D coordinates to UVs coordinate
@0266 Help is available on line at :
@0267 Hide
@0268 UnHide
@0269 Reset 3D coords
@0270 Load presets
@0271 User's pref
@0272 Browse and modify presets
@0273 Mouse
@0274 Key Modifiers
@0275 Cancel
@0276 Global scaling
@0277 Full screen On/Off
@0278 Edge Edit mode 
@0279 Poly edit mode
@0280 Hide selected polygons 
@0281 Unhide polygons 
@0282 Selection mode polygons
@0283 Selection mode edges
@0284 Selection see-through mode on
@0285 Selection see-threw mode off
@0286 Misc
@0287 Undos stack size in Mb (Save Prefs and restart needed)
@0288 Selection preview for unique selection
@0289 Stamp UV in .ps...
@0290 Export UV layout in a postscript file (*.ps)
@0291 Unable to open file in writing mode
@0292 Save UV layout in postscript format
@0293 Selection mode points
