1. Install "Plastics Insight 6.1", including "Product Security"
2. Optionally install "CAD Doctor 3.0" & "Magics STL Expert 3.0", "Design Link 5.3"
3. Stop "Moldflow Product Security"  and "Plastics Insight 6.1 Job Manager" service if it runs.
4. Put MF2007_fix.exe to "Program Files\Moldflow\Product Security\" and run it there.
5. Put MF2007_fix.exe to "Program Files\Moldflow\Plastics Insight 6.1\bin" and run it there.
6. If you done #2, run MF2007_fix.exe in:
	"Program Files\Moldflow\CAD Doctor 3.0\bin",
	"Program Files\Moldflow\Design Link 5.3\bin",
	"Program Files\Moldflow\Design Link 5.3\Backup\pre_5.3000\bin" (depending on updates installed)
7. Put mfpsd.exe & keyfile to "Program Files\Moldflow\Product Security\"
8. Start "Moldflow Product Security" service and wait some time (1 min), or reboot

Warning: set your firewall to block any internet connection of MF products.
In order to desactive 'Performance Logging': File -> Preferences ->Internet ->Upload:never



cad-doctor-300װİ

CAD Doctor 3.0\config

CadDoctor.ini


[System]
; Stack size while serializing (MB)
StackSizeAtSerializing=250
UseThreadForSerialize=False
һ
Locale=English 
Ҵ½°װ:
ȰװMPIҵ汾ҵ汾ȵⶼԣ鰲װҵ汾ȫĬϰװͿԣаװϺʽʼƽ⣬ֱҵĵԡ򿪡ġѡҵġMoldflow Product Security͡Plastics Insight 6.1 Job ManagerͣãɱҲʱͣã 
Ȼ󣬰ƽMF2007_fix.exe ŵMPIİװ· "Program Files\Moldflow\Product Security\"棬MF2007_fix.exe 
ٰMF2007_fix.exe  "Program Files\Moldflow\Plastics Insight 6.1\bin" ȻMF2007_fix.exe 
װCAD Doctor 3.0ҲMF2007_fix.exe    "Program Files\Moldflow\CAD Doctor 3.0\bin",Ȼ
ƽ mfpsd.exe  keyfileļ "Program Files\Moldflow\Product Security\"棬ֱӸԭʼļ
ȻǰֹͣġMoldflow Product Security͡Plastics Insight 6.1 Job Manager񣬵1ӣͿMPI
CAD Doctor 3.0Ĭϰװİ汾ģǰİװͿ޸ĳӢİ汾
⣬Ϊ˷ֹMPIԶӵMPIվµĲƽʧܣڵһMPIļ˵棬Internet ӵMPIѡȫá