<?xml version="1.0" encoding="UTF-8"?>
<plist version="1.0">
	<dict>
		<key>Major Version</key><integer>2</integer>
		<key>Minor Version</key><integer>0</integer>
		<key>Tool Tips</key>
		<dict>
			<key>Eject</key>
			<array>
				<dict>
					<key>Width</key><integer>400</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Eject[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Unloads the Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcut[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left| | |Action|Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>shift alt left-arrow| | |Eject|shift alt right-arrow</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Include subcrate tracks</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Include subcrate tracks[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When this option is turned on, any crate will also display the contents of all its subcrates.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Play from 1st cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Play from first cue point[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When this option is selected, the track will play from the first cue point if the track contains a cue point.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This option is overridden by the 'instant doubles' option and overrides the 'play from start' option.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Instant doubles</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Instant doubles[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When this option is selected and you load a file onto one Virtual Deck that is already loaded on the other Virtual Deck, the file that you load will play from the same position as the first file.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This option overrides 'play from first cue point' and 'play from start'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Vertical waves right</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Vertical waves right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string> The waveforms will be displayed vertically on the right side of the screen.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Vertical waves left</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Vertical Waves Left[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string> The waveforms will be displayed vertically on the left side of the screen.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Horizontal waves</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Horizontal waveforms[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string> The waveforms will expand to fill the available space.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Audio cache</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Audio cache (seconds)[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the slider to set the amount of audio that is loaded into memory. A small audio cache will place less load on your computer and the tracks will load faster. A large audio cache will give you a bigger view of the waveform when the Main Waveform View is zoomed out.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Sort Cues Chronologically</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sort cue points chronologically[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The cue points can be set in any order you like. Tick this option to force the cue points to be ordered by time. If you uncheck this option, the cue points will revert to the order in which they were set.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Center on selected song</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Center on selected song[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When this option is selected, the song library will keep the highlighted song centered vertically when scrolling with the arrow keys or platter scroll.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Elapsed recording time</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Elapsed recording time[/b]</string>
				</dict>
			</array>
			<key>Use itunes library</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Show iTunes(tm) library[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tick to include access to your existing iTunes library. All tracks will be imported into the Serato library.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Your playlists will appear in the 'Crates' panel, including iTunes &quot;smart playlists&quot;. If your iTunes does not appear, check that the tracks are encoded in the correct format (MP3, wave or aiff). Tracks purchased via iTunes Music Store can only be played in iTunes or an iPod.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Fader start</key>
			<array>
				<dict>
					<key>Width</key><integer>350</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Fader Start[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>To start playback using the crossfader, pause the track at the desired position and press the 'fader start' button. Now each time you move the crossfader from its end position, the track will start playing from that point.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can set the fader start point using the keyboard shortcut 'ctrl I' for the left Virtual Deck and 'ctrl K' for the right Virtual Deck. You can also jump to this point without moving the fader by pressing 'I' for the left deck and 'K' for the right.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The fader start point is not saved with the file and by default this point is set to the beginning of the track.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left|Action| | |Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>I|Jump to fader start point| | |K</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl I|Set fader start point| | |ctrl K</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Show file types</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Show all file types[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Enable this option to display all files in the import window. If this option is not selected, only playable files will be shown.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Analyze Files</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Build Overviews[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click the 'Analyze Files' button to automatically analyze any new files in your library. which will prepare your tracks by creating overviews, calculating BPMs, checking for corruption, and creating Beatgrids. [b]Note[/b] : 'Set Auto BPM' and 'Set Beatgrid' will need to be checked for BPMs and Beatgrids to be calculated. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The track name (and location) are shown in the field immediately above the button. The first field on the bottom line shows the track reading progress, the second field shows analyzing progress and the third field shows track writing progress.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click 'Analyze Files' to analyze any new files added to your library that haven't already been analyzed. Hold down ctrl and click the 'Analyze Files' button to re-analyze all overviews in your library. You can also select a group of tracks and drag them onto the 'Analyze Files' button to analyze your files for just those tracks.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use this feature to prepare the overviews in all your tracks before your performance.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>USB warning</key>
			<array>
				<dict>
					<key>Line</key><string>[b]USB Dropout warning[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>A small light will appear here if there are USB dropouts. The light will be red for one second and orange for four seconds. Thus, if it is continuously red, there are USB dropouts at least once per second.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If you do experience USB drop outs:</string>
				</dict>
				<dict>
					<key>Line</key><string>- Increase the USB audio buffer size (in the setup screen)</string>
				</dict>
				<dict>
					<key>Line</key><string>- Try closing other applications running at the same time as ITCH</string>
				</dict>
				<dict>
					<key>Line</key><string>- Try turning off background tasks, for example, wireless networking</string>
				</dict>
				<dict>
					<key>Line</key><string>- Try some of the computer optimization tips in the Tips and Tricks section at serato.com/itch</string>
				</dict>
				<dict>
					<key>Line</key><string>- If your CPU load is very high, try decreasing the maximum screen updates (in the setup screen).</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If the problem persists, please contact technical support. (visit serato.com/itch for details.)</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>GUI refresh</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Maximum screen updates[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to limit the screen refresh rate.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Try reducing the screen refresh rate if you are having performance problems. It could also be useful if you want to limit ITCH's processor usage, for example if you are running a recording program at the same time as ITCH.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This setting applies to the entire screen.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Refresh Library</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Rescan ID3 tags[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to force ITCH to re-read all file tags. Use this function if you have edited or modified file tags outside of ITCH.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Rescanning will also indicate which files cannot be found by ITCH. Sort your library by the status column to group all missing tracks together.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Current song info right</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Current track[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Title, artist, total time and BPM information for the track currently loaded on the right deck. Note that artist and BPM information will only be displayed if it is available in the file information.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Current song info left</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Current track[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Title, artist, total time and BPM information for the track currently loaded on the left deck. Note that artist and BPM information will only be displayed if it is available in the file information.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Protect library</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Protect library[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Enable this setting to prevent accidental track or crate deletion and editing of tags.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Auto fill overviews</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Automatically fill track overview[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Create the full track overview information as soon as the track is loaded to a Virtual Deck. If not ticked, the overview will be made as the track plays.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Disconnect the ITCH hardware interface and click 'build overviews' (in the main screen) to make overviews for all tracks in your library.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Track end warning</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Track end warning[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tick this option to flash the progress bar around the outside of the virtual deck when you are 20 seconds from the end of the track. This does not apply to tracks less than one minute long.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>iTunes track list</key>
			<array>
				<dict>
					<key>Width</key><integer>500</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]iTunes Library and Playlists[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The track list shows all the information on the tracks in your iTunes playlists. Highlight a track and press 'shift left-arrow' to load it to the left Virtual Deck. Press 'shift right-arrow' to load the highlighted track to the right Virtual Deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the left-facing arrow in the top right corner to choose which columns you wish to display. Click on a column header to sort the contents of that column alphabetically. Click and drag a column header to change the order of the columns. Click and drag the edges of the column header to resize a column. Note that the column width will default to the length of the longest text string within that column and a column cannot be wider than the longest text string in that column</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Double click to edit track information. Highlight and press 'ctrl delete' to remove a track from your library. Note that 'protect library' (in the setup screen) must be unticked to allow you to remove or edit a track.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tracks that have not been played have white text. Tracks that have been played have yellow text. To reset played tracks to white, press the 'history' button and press 'clear'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If the track has red text, it cannot be found. Most likely it has been moved, edited or deleted outside of ITCH. Re-import the track into your library</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The column on the left shows the track status. A question mark means the file cannot be found and must be re-imported. An iTunes logo with a crack in it means the file is corrupt and should be re-encoded.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl O' to play the highlighted track in your default media player. Press 'ctrl P' to add the highlighted track(s) to the prepare area.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl shift delete' to remove the highlighted tracks from your library and send them to the recycle bin / trash.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Hold down 'ctrl shift' and use the 'up' and 'down' arrows to move through crates and playlists, while keeping focus on your library. When you release 'ctrl shift', you can use the arrow keys to move up and down within the track list.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Note: If you edit track information, the change will not appear in iTunes until it is played (in iTunes). Tip: to force iTunes to refresh all track info, select all, press 'ctrl I' to get info and press OK.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>CD track list</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Audio CD Track List[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The track list shows a list of the tracks on the selected audio CD. Highlight a track and press 'shift left-arrow' to load it to the left Virtual Deck. Press 'shift right-arrow' to load the highlighted track to the right Virtual Deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the left-facing arrow in the top right corner to choose which columns you wish to display. Click on a column header to sort the contents of that column alphabetically. Click and drag a column header to change the order of the columns. Click and drag the edges of the column header to resize a column. Note that the column width will default to the length of the longest text string within that column and a column cannot be wider than the longest text string in that column</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl O' to play the highlighted track in your default media player. Press 'ctrl P' to add the highlighted track(s) to the prepare area.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Check For Updates</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Check For Updates[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This button opens a page in your default web browser that will notify you if ITCH software updates are available.</string>
				</dict>
			</array>
			<key>Crate track list</key>
			<array>
				<dict>
					<key>Width</key><integer>500</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Crate Track List[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The track list shows all the information on the tracks of the selected crate. Highlight a track and press 'shift left-arrow' to load it to the left Virtual Deck. Press 'shift right-arrow' to load the highlighted track to the right Virtual Deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the left-facing arrow in the top right corner to choose which columns you wish to display. Click on a column header to sort the contents of that column alphabetically. Click and drag a column header to change the order of the columns. Click and drag the edges of the column header to resize a column. Note that the column width will default to the length of the longest text string within that column and a column cannot be wider than the longest text string in that column</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>In Crates and iTunes playlists, you can sort by the '#' column to customize the order of your tracks within the crate or playlist.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Double click to edit track information. Highlight and press 'ctrl delete' to remove a track from your library. Note that 'protect library' (in the setup screen) must be unticked to allow you to remove or edit a track.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tracks that have not been played have white text. Tracks that have been played have yellow text. To reset played tracks to white, press the &quot;history&quot; button and then press 'clear'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If the track has red text, it cannot be found. Most likely it has been moved, edited or deleted outside of ITCH. Re-import the track into your library</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The column on the left shows the track status. A question mark means the file cannot be found and must be re-imported. A disk with a crack in it means the file is corrupt and should be re-encoded. A iTunes logo means the track comes from your iTunes library. iTunes logo with a crack means the track comes from your iTunes library and is corrupt. It should be re-encoded.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl O' to play the highlighted track in your default media player. Press 'ctrl P' to add the highlighted track(s) to the prepare area.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl shift delete' to remove the highlighted tracks from your library and send them to the recycle bin / trash.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Hold down 'ctrl shift' and use the 'up' and 'down' arrows to move through crates and playlists, while keeping focus on your library. When you release 'ctrl shift', you can use the arrow keys to move up and down within the track list.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Track list</key>
			<array>
				<dict>
					<key>Width</key><integer>500</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Main Library Track List[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The track list shows all the information on the tracks in your library. Highlight a track and press 'shift left-arrow' to load it to the left Virtual Deck. Press 'shift right-arrow' to load the highlighted track to the right Virtual Deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the left-facing arrow in the top right corner to choose which columns you wish to display. Click on a column header to sort the contents of that column alphabetically. Click and drag a column header to change the order of the columns. Click and drag the edges of the column header to resize a column. Note that the column width will default to the length of the longest text string within that column and a column cannot be wider than the longest text string in that column.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Double click to edit track information. Highlight and press 'ctrl delete' to remove a track from your library. Note that 'protect library' (in the setup screen) must be unticked to allow you to remove or edit a track.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tracks that have not been played have white text. Tracks that have been played have yellow text. To reset played tracks to white, press the &quot;history&quot; button and then press 'clear'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If the track has red text, it cannot be found. Most likely it has been moved, edited or deleted outside of ITCH. Re-import the track into your library</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The column on the left shows the track status. A question mark means the file cannot be found and must be re-imported. A disk with a crack in it means the file is corrupt and should be re-encoded. The iTunes logo means the track comes from your iTunes library. The iTunes logo with a crack means the track comes from your iTunes library and is corrupt. It should be re-encoded.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl O' to play the highlighted track in your default media player. Press 'ctrl P' to add the highlighted track(s) to the prepare area.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press 'ctrl shift delete' to remove the highlighted tracks from your library and send them to the recycle bin / trash.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Hold down 'ctrl shift' and use the 'up' and 'down' arrows to move through crates and playlists, while keeping focus on your library. When you release 'ctrl shift', you can use the arrow keys to move up and down within the track list.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Read statusbar</key>
			<array>
				<dict>
					<key>Line</key><string>[b]File reading status[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Displays the location and names of files that are currently being read by ITCH</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Column chooser</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Show/hide columns[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to show a list of available columns. Click on an entry to show or hide this column in your main library.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Label</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Label[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Labelアイコンをクリックすることで、ヴァーチャルデッキの色の変更が可能です。選択された色はトラックと共に保存されます。色を使ったグループ分けに利用してください。</string>
				</dict>
			</array>
			<key>Cue points</key>
			<array>
				<dict>
					<key>Width</key><integer>550</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Cue points[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click the '+' button to place cue points at important points in your track. The cue point will be set at the current play-head position.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The colored line on the Virtual Deck will be at 12 o'clock when you are at the cue point. As you move beyond the cue point, the colored line will shorten by one fifth per rotation. Likewise, as you approach the cue point, the colored line will grow by one fifth per rotation.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can jump to a cue point by pressing the play arrow to the left of each cue point. Use keyboard shortcuts '1 - 5' to jump to cue points on the left deck and '6 - 0' to jump to cue points on the right deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the 'x' button to remove a cue point and on the colored box to change cue point color.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the keyboard shortcut 'ctrl comma' to set a cue point on the left deck and 'ctrl period' to set a cue point on the right deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the color square to change the color of the cue point.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can drag cue points up or down to change their position.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left| |Action| | | |Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>1 2 3 4 5| |Jump to Cue Point| | | |6 7 8 9 0</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl 1 2 3 4 5| |Set Cue Point| | | |ctrl 6 7 8 9 0</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl comma| |Set next new Cue Point| | | |ctrl period</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl I| |Set temporary Cue Point| | | |ctrl K</string>
				</dict>
				<dict>
					<key>Line</key><string>I| |Jump to temporary Cue Point| | | |K</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Dragable bars</key>
			<array>
				<dict>
					<key>Line</key><string>クリックしたまま引っ張るとパネルサイズを調節できます。</string>
				</dict>
			</array>
			<key>Prepare area</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Prepare[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Drag tracks into this area to quickly make a temporary selection. Tracks will be automatically removed from this area after they have been played.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can also drag tracks directly onto the 'prepare' button, or select one or more tracks and press 'ctrl P' to add them to the prepare list.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Shortcut| |Action[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl P| |Add selected tracks to the prepare crate</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Prepare button</key>
			<array>
				<dict>
					<key>Width</key><integer>350</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]PREPAREボタン[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>一時的にトラックを選択したい場合は、このエリアにトラックをドラッグしてください。ドラッグしたトラックを使用すると自動的にリストから削除されます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>また、&quot;PREPARE&quot;ボタンの上にもドラッグすることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]ショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>-リストで選択したトラックをPREPAREに移動: Ctrl + P </string>
				</dict>
			</array>
			<key>Clear recent button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]最近使用した曲のリストをクリアする[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>REVIEWリストを空にするか、&quot;CLEAR&quot;ボタンを押して、トラックの色を白に戻します。</string>
				</dict>
			</array>
			<key>Review area</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Review recently played[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>History contains a complete log of all the tracks you have played and allows you to export ITCH session information as a data file.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Sessions are catalogued chronologically. Using the drop down arrow, you can navigate to, and view detailed information of any previous sessions.</string>
				</dict>
			</array>
			<key>Review button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]History Panel[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Show the session history panel.</string>
				</dict>
			</array>
			<key>Import area</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Import files and folders[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Navigate your hard drive(s) and CD players, select files or folders and drag them into your library or crates. You can also drag folders or files onto the new crate button to make a new crate directly from your selection.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>If you drag a file to a Virtual Deck, it will automatically be added to your library.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Go to the setup screen and tick 'show all file types' to also display non-playable files in the import panel.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Highlight an audio file and press 'ctrl O' to play it in your computer's default audio player.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Import button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ファイルとフォルダをインポートする[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>ハードディスクとCDドライブの中に、ファイルとフォルダーを探して、libraryかcrateへドラッグしてください。トラックを&quot;CRATE&quot;ボタンにドラッグすると自動的に新しいcrateが作られます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>トラックをバーチャルデッキへ直接ドラッグすると、自動的にlibraryにもそのトラックが入ります。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>トラックをマウスで選択し、&quot;Ctrl + O&quot;を押すとパソコンの音楽プレイヤーで自動的にそのトラックが再生されます。</string>
				</dict>
			</array>
			<key>Album art display area</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Display album art[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Album art can be added to files using 3rd party programs such as iTunes.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Library panel</key>
			<array>
				<dict>
					<key>Line</key><string>[b]クレート、CD、プレイリスト[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>このエリアで、クレートとオーディオCDとiTunesプレイリストを見ることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>'All...'をクリックすると、プレイリストのすべてのトラックを見ることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>'+'ボタンをクリックすると、新しいクレートを出すことができます。クレートをドラグすると、順序を並び替えることもできます。同じトラックをいくつでも多数のクレートに入れることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>iTunesプレイリストをインポートしたいときは、セットアップ画面に戻り、</string>
				</dict>
				<dict>
					<key>Line</key><string>'read iTunes library'をチェックしてください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>パソコンのCDドライブにCDを入れると、ここに出ます。CDに入っている曲がメインライブラリに出ます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>クレートの名前変更をしたい場合は、ダブルクリックして行ってください。</string>
				</dict>
				<dict>
					<key>Line</key><string>クレートをハイライトして、'ctrl delete'を押すと、そのクレートを消すことができます。クレートの名前変更や削除する場合、かならずセットアップ画面の'protect library'をチェックしないでください。もし、誤って削除してしまった場合は、ごみ箱から引っ張ることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>トラックの順序を変えたいときは、'#'をクリックし、動かしたいトラックをハイライトします。ハイライトしたトラックをドラグしてください。</string>
				</dict>
				<dict>
					<key>Line</key><string>トラックのほかのコラムからでも、順序の変更はできますが、'#'を押してからでないと、ドラッグすることはできません。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Column selector</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ディスプレイコラム[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>ライブラリやクレートのレイアウトをカスタマイズできます。</string>
				</dict>
				<dict>
					<key>Line</key><string>コラムヘッダーをクリックすると、ファイルの情報を並べ替えることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>コラムの枠をドラッグすると、幅を狭くしたり広くしたりできます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>コラムヘッダーをドラッグすると、項目を移動させることができます。</string>
				</dict>
			</array>
			<key>Playback keys use shift</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Playback keys use shift[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>With this setting enabled, you must either hold down shift or turn caps lock on to use the playback keys (play, pause, bend, pitch +/-, rewind, fast forward, censor and jump to cue points). If you do not have shift down or caps lock on pressing a key will take you to the track whose first letter matches that key.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Restart on load</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Play from start[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>この設定にチェックをすると、曲をロードした際に曲の頭からプレイが開始されます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>尚、このオプションより、&quot;instant doubles&quot;と&quot;play from first cue point&quot;が優先されます。</string>
				</dict>
			</array>
			<key>Latency apply button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]バッファサイズ変更の適用[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>変更したバッファサイズを適用するには、[apply]ボタンをクリックしてください。</string>
				</dict>
			</array>
			<key>Latency slider</key>
			<array>
				<dict>
					<key>Line</key><string>[b]バッファサイズの変更[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>USBオーディオバッファサイズは、できる限り低い設定で使用するのが好ましいですが、低く設定するとコンピュータへの負担が大きくなります。クリックノイズやオーディオのドロップアウト（ぶつ切れ）が起きる場合は、USBバッファサイズを大きく設定してください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>USBオーディオバッファサイズを調整するには、&quot;SETUP&quot;画面でスライダーを変更し、[apply]ボタンをクリックします。</string>
				</dict>
			</array>
			<key>Braking</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ブレーキング[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Play/Pauseのボタンを使用した際の、走り出し/停止の速さを調節できます。&quot;SETUP&quot;画面でツマミを調整してください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>ツマミが左にあると速く、右にあると遅くなります。</string>
				</dict>
			</array>
			<key>New crate</key>
			<array>
				<dict>
					<key>Line</key><string>[b]クレートの新規作成[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>フォルダもしくは選択されたトラックを&quot;New Crate&quot;ボタンへドラッグすることで、選択されたトラックを含むクレートを新規作成できます。</string>
				</dict>
			</array>
			<key>Clear search</key>
			<array>
				<dict>
					<key>Line</key><string>[b]検索[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>虫眼鏡のアイコンをクリックすると、検索リストが表示されます。</string>
				</dict>
				<dict>
					<key>Line</key><string>&quot;x&quot;をクリックすると、リストが閉じます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>&quot;Ctrl + F&quot;を押すと、検索ウィンドウにジャンプします。クレートかプレイリストにいる場合、メイン画面へジャンプします。クレーとかプレイストをクリックすると、検索はクリアされます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]ショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>- 検索:Ctrf + F</string>
				</dict>
			</array>
			<key>Search box</key>
			<array>
				<dict>
					<key>Line</key><string>[b]検索[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>虫眼鏡のアイコンをクリックすると、検索リストが表示されます。</string>
				</dict>
				<dict>
					<key>Line</key><string>&quot;x&quot;をクリックすると、リストが閉じます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>&quot;Ctrl + F&quot;を押すと、検索ウィンドウにジャンプします。クレートかプレイリストにいる場合、メイン画面へジャンプします。クレーとかプレイストをクリックすると、検索はクリアされます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]ショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>- 検索:Ctrf + F</string>
				</dict>
			</array>
			<key>Mic save button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Save recording[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Save the recording to the crate named 'Recorded'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Recordings are saved in either 16-bit or 24-bit, as either WAVE or AIFF files. This can be chosen in the Playback tab in the Setup menu. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic save box</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Name recording[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Enter a recording name and click the save button on the right. The recording will be saved to the crate named 'Recorded'.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Recordings are saved in either 16-bit or 24-bit, as either WAVE or AIFF files. This can be chosen in the Playback tab in the Setup menu. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic record</key>
			<array>
				<dict>
					<key>Line</key><string>[b]マイク入力の録音[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>録音を開始する場合や録音を停止する場合は、録音ソースから&quot;Mic&quot;を選択し、[Rec]ボタンをクリックします。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>録音されたファイルをデッキに読む込む場合は,トラックロードを操作してください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]ショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>- 新規マイク入力の録音 : Ctrl + N</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Browse area</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ライブラリのブラウズ[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>ライブラリのフィールド別一覧（ジャンル、アーティスト、BPM、アルバム）ができます。</string>
				</dict>
			</array>
			<key>Browse button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ブラウザーの表示[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>ライブラリのフィールド別一覧（ジャンル、アーティスト、BPM、アルバム）ができます。</string>
				</dict>
			</array>
			<key>Album art button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]アルバムアートの表示/非表示[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>iTunesなどのプログラムを利用することで、アルバムアートをファイルに追加することができます。</string>
				</dict>
			</array>
			<key>Beat display</key>
			<array>
				<dict>
					<key>Line</key><string>[b]ビートマッチング　ディスプレイ[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>表示されるマーカーを調節することで、両デッキのビート（拍）を合わせます。マーカーを調整するには、Jogコントロールを操作します。</string>
				</dict>
			</array>
			<key>Waveform display</key>
			<array>
				<dict>
					<key>Width</key><integer>450</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Main Waveform Display[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Colors in the wave show the frequency of the sound: bass = red, mids = green, treble = blue.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Hold 'ctrl' and click on the display to switch between 3 band spectrum view and combined color-coded view.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the waveform and drag to &quot;scrub&quot; or make fine adjustments to position.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select the 'horizontal waveform' option in the setup screen to display the waveform horizontally.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Shortcut| | |Action[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>+ and -| | |Zoom main waveform display</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl+click on display | | |Switch to 3-band waveform</string>
				</dict>
				<dict>
					<key>Line</key><string>shift+click on display| | |Change the waveform size to small or large</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]If Beatgrid is Enabled the Beatgrid Markers will be displayed as follows:[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>Red marker| | |Downbeat or manually set Beatgrid Marker</string>
				</dict>
				<dict>
					<key>Line</key><string>White marker (thin)| | |Beatgrid Beat Marker</string>
				</dict>
				<dict>
					<key>Line</key><string>White marker (thick)| | |Beatgrid Bar Marker with the Bar number displayed above.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Track overview</key>
			<array>
				<dict>
					<key>Line</key><string>[b]トラックオーバービュー ディスプレイ[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>トラックのキューポイントと曲の頭がどこにあるかを表示します。トランジションやブレイクダウンの場所も表示します。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>オーバービューの後ろのグレー色のラインが時間を表示します。細いラインが1分ごと、太いラインが5分ごとの分数を表しています。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>オーバービューフィルターを使用する場合は、コンピュータから外してください。ラリブらリに入っている全トラックのオーバービューを作成することができます。オーバービューを自動的に作成したい場合は、&quot;Set auto bpm&quot;にチェックを入れてください。</string>
				</dict>
			</array>
			<key>Tempo match</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Tempo Match Display[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Match the peaks to align the tempo of the two tracks.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Orange peaks above are from the left deck, blue peaks below are from the right deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Autoplay</key>
			<array>
				<dict>
					<key>Width</key><integer>350</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]オートプレイ[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>現在演奏している曲が終わると、次の曲が演奏し始めます。次の曲或いは前回の曲をクリックすることで、ライブラリ内を移動します。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>単一のクレートもしくはプレイリストから演奏する場合、そのクレートもしくはプレイスとから曲をロードしてください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]キーボードショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>左デッキ</string>
				</dict>
				<dict>
					<key>Line</key><string>- 前回演奏された曲のロード:alt + Q</string>
				</dict>
				<dict>
					<key>Line</key><string>- 次回演奏する曲のロード :alt + A</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>右デッキ</string>
				</dict>
				<dict>
					<key>Line</key><string>- 前回演奏された曲のロード:alt + W</string>
				</dict>
				<dict>
					<key>Line</key><string>- 次回演奏する曲のロード :alt + S</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Exit</key>
			<array>
				<dict>
					<key>Width</key><integer>200</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Exit ITCH[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Restore</key>
			<array>
				<dict>
					<key>Width</key><integer>200</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Restore[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Minimize</key>
			<array>
				<dict>
					<key>Width</key><integer>200</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Minimize[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Virtual deck</key>
			<array>
				<dict>
					<key>Width</key><integer>550</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]バーチャルデッキ[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>トラックをロードしたい場合はここにドラッグしてください。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>バーチャルデッキでトラックの残り時間を見ることができます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>現在、流しているトラックが終わりそうなとき、バーチャルデックの周りのバーが点滅して、&quot;警告&quot;するように設定することもできます。</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]キーボードのショートカット[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>左のバーチャルデッキ</string>
				</dict>
				<dict>
					<key>Line</key><string>- 曲のアンロード:Shift + 左矢印キー</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>右のバーチャルデッキ</string>
				</dict>
				<dict>
					<key>Line</key><string>- 曲のアンロード:Shift + 右矢印キー</string>
				</dict>
				<dict>
					<key>Line</key><string>　</string>
				</dict>
			</array>
			<key>Setup</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Setup ITCH[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Go to the setup screen to set general ITCH preferences.</string>
				</dict>
			</array>
			<key>Tool tip</key>
			<array>
				<dict>
					<key>Width</key><integer>750</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left Virtual Deck| | |Action| | | |Right Virtual Deck| | |[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>shift left-arrow| | |Load selected track| | | |shift right-arrow| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl shift right-arrow| | |Double track| | | |ctrl shift left-arrow| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>shift alt left-arrow| | |Unload Virtual Deck| | | |shift alt right-arrow| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>W| | |Play/Pause| | | |S</string>
				</dict>
				<dict>
					<key>Line</key><string>Q| | |Reverse play direction| | | |A</string>
				</dict>
				<dict>
					<key>Line</key><string>T| | |Bend down| | | |G| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>Y| | |Bend up| | | |H| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>U| | |Censor| | | |J| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>I| | |Jump to temporary Cue Point| | | |K| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>alt Q| | |Load previous track| | | |alt A| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>alt W| | |Load next track| | | |alt S| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>alt E| | |Rewind| | | |alt D| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>alt R| | |Fast forward| | | |alt F| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>1 2 3 4 5| | |Jump to Cue Point| | | |6 7 8 9 0| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl 1 2 3 4 5| | |Set Cue Point| | | |ctrl 6 7 8 9 0| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl comma| | |Set next new Cue Point| | | |ctrl period| | |</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl I| | |Set temporary Cue Point| | | |ctrl K| | |</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Shortcut| | |Action[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>esc| | |Clear/Exit ITCH</string>
				</dict>
				<dict>
					<key>Line</key><string>tab| | |Move keyboard focus</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl F| | |Find a track in your entire song library</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl L| | |Locate the last loaded track (Press again for other Deck)</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl R| | |Reveal - show track in Explorer (PC) or Finder (Mac)</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl P| | |Add track(s) to prepare window</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl N| | |Start new recording (mic, aux, or mix)</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl O| | |Open track in default media player</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl Z| | |Undo last track load</string>
				</dict>
				<dict>
					<key>Line</key><string>+ and -| | |Zoom main waveform display</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl delete| | |Delete track from library, delete crate</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl shift delete| | |Send file to trash/recycling bin</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl shift up-arrow| | |Move up through crates</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl shift down-arrow| | |Move down through crates</string>
				</dict>
				<dict>
					<key>Line</key><string>alt up/down arrow| | |(while editing BPM) Double/Halve BPM</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]With Beatgrid disabled[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>alt spacebar| | |Activate BPM tapper, left Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string>alt spacebar (again)| | |Activate BPM tapper, right Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string>space| | |Tap BPM (Once activated)</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]With Beatgrid enabled[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>alt spacebar| | |Enter Beat Grid Edit Mode for the left Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string>alt spacebar (again)| | |Press again to cycle to the next the next Virtual Deck.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Notes:[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>(1) If the option 'playback keys use shift' is enabled on the setup screen all playback keys (for example play, pitch down, jump to cue 1, etc.) require either shift or caps lock to be pressed. The shortcuts described are the keys on a US keyboard. On other keyboards these key positions may be labelled differently.</string>
				</dict>
				<dict>
					<key>Line</key><string> For example, [Ctrl] on Windows is equivalent to [Command] on Mac OS X. Similarly, [Alt] on Windows means [Option] under Mac OS X.  All our key commands were written to be cross platform compatible so Ctrl on Windows is equal to Ctrl on Mac OS X.</string>
				</dict>
			</array>
			<key>Record input select</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Record input select[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click on the downward facing triangle to select the record input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic trim knob</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic trim knob[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the level of the mic channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic EQ knob hi</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic EQ hi[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the hi frequency content of the mic channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic EQ knob mid</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic EQ mid[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the mid frequency content of the mic channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mic EQ knob lo</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic EQ low[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the low frequency content of the mic channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Aux trim knob</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux trim knob[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the level of the Aux channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Aux EQ knob hi</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux EQ hi[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the hi frequency content of the Aux channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Aux EQ knob mid</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux EQ mid[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the mid frequency content of the Aux channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Aux EQ knob lo</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux EQ low[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the low frequency content of the Aux channel input.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Lock playing deck</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Lock playing deck[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use this option to prevent accidental track loads or changes. If the Lock playing deck option is selected, you can only change the song on a Virtual Deck that is paused.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Audio output</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Audio Output[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Set the master audio output to mono or stereo.</string>
				</dict>
			</array>
			<key>BPM tapper</key>
			<array>
				<dict>
					<key>Width</key><integer>400</integer>
				</dict>
				<dict>
					<key>Line</key><string>[b]BPM tapper[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tap the button on each quarter note to calculate the BPM. Press the Enter key to write the current value to the BPM tag, or ESC to cancel. After you've tapped the first beat, you can switch to double time tapping, half time, start of each bar etc. The range is set by the first two taps, after that you can switch to any steady rhythm you feel comfortable with – quarter notes, half note, whole notes etc.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Shortcut | | | Action[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>alt-spacebar | | | Activate BPM tapper, left Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string>alt-spacebar (again) | | | Activate BPM tapper, right Virtual Deck</string>
				</dict>
				<dict>
					<key>Line</key><string>spacebar | | | tap tempo</string>
				</dict>
				<dict>
					<key>Line</key><string>enter | | | Save</string>
				</dict>
				<dict>
					<key>Line</key><string>esc | | | Cancel</string>
				</dict>
			</array>
			<key>Key lock</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Key Lock[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When Key Lock is on, the key or pitch of the song stays locked at what it would be if the track was playing at normal speed, regardless of the platter speed of the turntable or CD player. Key Lock has scratch detection, so that it automatically turns off when scratching for a natural scratching sound.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left[/b]| |[b]Action[/b]| |[b]Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>F5| |Key Lock| |F10</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Set auto bpm</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Set auto BPM[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>As part of the overview building process, ITCH can analyze your tracks and determine the BPM of the song. If this option is checked, the overview building process will write the BPM value to an ID3 tag in the file. Files that already have overviews will not have their BPM value changed. Note that you can rebuild the overview and therefore apply the auto BPM setting if ticked, by dragging tracks onto the build overviews button.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Use auto gain</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Auto gain[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>As part of the overview building process, ITCH automatically calculates an auto-gain value for each track. This value represents the gain adjustment required to match the perceived loudness of the track to a reference level. If the &quot;set auto gain&quot; option is checked, each time a track containing auto-gain data is loaded to a deck the track gain knob will be set to a value that matches the level of audio in the track to the reference value selected from the drop-down list to the right.</string>
				</dict>
			</array>
			<key>Bpm range</key>
			<array>
				<dict>
					<key>Line</key><string>[b]BPM range[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This option limits the range of Auto BPM results. Values outside the selected range are halved or doubled to fit.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Hi-Quality Resampler</key>
			<array>
				<dict>
					<key>Line</key><string>[b]High Quality Resampler[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The hi-fi resampler uses slightly more processing power to eliminate digital distortion when scratching or changing the pitch of a track.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Relocate Lost Files</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Relocate Lost Files[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Clicking this button will search through all the connected drives for files that show in red (missing) in your library.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Include AAC Files</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Import AAC Files[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Changing this option will cause your iTunes library to be reloaded if you have the 'read iTunes library' option turned on.</string>
				</dict>
			</array>
			<key>Previous Track</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Load previous track[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcut[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left| |Action| | |Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>alt Q| |Load previous track| | |alt A</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Next Track</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Load next track[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left| |Action| | |Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>alt W| |Load next track| | |alt S</string>
				</dict>
			</array>
			<key>Play forwards</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Play / pause forward[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcut:[/b] W</string>
				</dict>
			</array>
			<key>Master Gain</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Adjust master output level[/b]</string>
				</dict>
			</array>
			<key>Auto Loop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Auto-looping[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>5 auto-loop buttons are available on screen at any one time. They range from 1/8 to 32 beats. The user can select the autoloop range with the &lt; and &gt; buttons.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Pressing auto-loop for [i]n[/i] beats will create a loop start point from the nearest beat to the playhead (within reason) and set a loop endpoint [i]n[/i] beats in the future. Pressing auto-loop 1 while auto-loop 1 is active will deactivate the loop. Pressing a different auto-loop button while looping is active will extend the endpoint of the current loop to the appropriate new auto-loop length.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>As the auto-loop buttons require the track bpm to be set to work, if no track bpm is set, the auto-loop buttons are greyed out. </string>
				</dict>
			</array>
			<key>Mic/Aux Button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic/Aux Button[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>By pressing this button, you reveal the MIC/AUX mixing panel, which opens the level indicator, trim and EQ knobs for the MIC/AUX inputs. This knobs control the gain before the signal is sent to ITCH for mixing. </string>
				</dict>
			</array>
			<key>Pitch navigator</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Pitch navigator[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The Pitch navigator indicates to which way the pitch slider needs to be moved to match the other track, so when you disengage auto-tempo, both tracks will remain beat-matched.</string>
				</dict>
			</array>
			<key>Playback Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Playback Mode[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The playback mode can be toggled between SINGLE, which will play only the loaded track, or CONTINUOUS, which will allow the following tracks on the playlist to be played after the current one</string>
				</dict>
			</array>
			<key>Repeat Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Repeat Mode[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When REPEAT is on, the loaded track will be played again from the beginning, once it has reached the end. </string>
				</dict>
			</array>
			<key>Loop Slot Indicator</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Loop Slot Indicator[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows which loop belongs to which slot.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Pitch Range</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Pitch Range[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The pitch range changes between ±8  , ±16 or ± 50 </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Auto Loop Indicator</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Auto Loop Indicator[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Displays the current Autoloop length.</string>
				</dict>
			</array>
			<key>Reverse Crossfader</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Reverse Crossfader[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Reverses the direction of the crossfader from left &lt;-&gt; right to right &lt;-&gt; left.</string>
				</dict>
			</array>
			<key>Loop selector</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Loop selector[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Selects which loop to activate.</string>
				</dict>
			</array>
			<key>Lock Loop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Lock Loop[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Pressing this button will prevent the loop from being accidently erased. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Clear loop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Clear loop[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Pressing this button will erase the loop.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Save Loop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Save Loop[/b] </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Pressing this button will save the loop.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Loop in</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Loop in[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Sets the in point of the loop</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Loop out</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Loop out[/b]  </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Sets the out point of the loop.</string>
				</dict>
			</array>
			<key>Pitch Indicator</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Pitch[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the current Pitch value.</string>
				</dict>
			</array>
			<key>Playback</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Playback[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Single = ITCH will play through the loaded track.</string>
				</dict>
				<dict>
					<key>Line</key><string>Continuous = ITCH will continuously play through all of the tracks in the currently selected track list.</string>
				</dict>
			</array>
			<key>Repeat</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Repeat[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Will repeat the loaded track indefinitely</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When REPEAT is on, ITCH will play the loaded track from the start after it reaches the end.</string>
				</dict>
			</array>
			<key>Autoloop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Autoloop[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the current autoloop value. </string>
				</dict>
				<dict>
					<key>Line</key><string>The range goes from 1/8 of a Bar, to 32 Bars.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Enable beat grid</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enable Beat Grid[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>With this option checked you will enable Beat Girds.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This gives you options to access Enter Grid Edit Mode as well as using Sync for Beatgrid Sync.</string>
				</dict>
			</array>
			<key>Cue Mix</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Cue Mix[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to adjust the balance of what you hear in the headphones. Turn the dial towards MSTR to adjust the balance towards the MASTER output or towards CUE to adjust the balance towards the CUE signal.</string>
				</dict>
			</array>
			<key>Headroom</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Headroom[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select how much headroom your device has before the internal limiter engages.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Less headroom results in louder output, but increases the chance of engaging the limiter, especially when more than one audio channel is in the mix.  With the initial headroom setting of 0dB you can apply 3dB of gain per deck before you hit the limiter.</string>
				</dict>
			</array>
			<key>Headphone Overdrive</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Headphone Overdrive[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the knob to adjust the level of overdrive to increase the headphone volume. Higher levels can cause a reduction in audio quality. </string>
				</dict>
			</array>
			<key>VCI Cue/Play use shift</key>
			<array>
				<dict>
					<key>Line</key><string>[b]VCI-300 Cue/Play Use Shift[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Clicking this option means the cue and play buttons on the VCI-300 will only trigger if the shift button on the VCI-300 is also held down.</string>
				</dict>
			</array>
			<key>Record gain knob</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Record Gain Knob [/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the record gain knob to adjust the level / volume of your recording. </string>
				</dict>
			</array>
			<key>Recording level</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Recording Level[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the current recording level, as set by the record gain knob. Try to get the signal as loud as possible, but refrain from going into the red, which could result in clipped or distorted recordings.</string>
				</dict>
			</array>
			<key>Custom Crate Columns</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Custom Crate Columns[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>With this option checked you can have different columns displayed for each crate. With it unchecked, all crates will have the same column layout.</string>
				</dict>
			</array>
			<key>Recording Options</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Recording Options[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can select the bit depth and file format for your ITCH recordings. Select from 16 bit or 24 bit depth and WAV or AIFF format.</string>
				</dict>
			</array>
			<key>NS7 Instant Playback</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Instant Playback[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>With Instant Playback enabled the platter spin-up time is ignored and track playback begins at actual speed. Platter control resumes when the platter is running at full speed. This option will only work if the Start Time knob on the NS7 is set to the minimum value.</string>
				</dict>
			</array>
			<key>Platter Speed</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Platter Speed[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the speed of the virtual deck to 33 or 45 RPM.</string>
				</dict>
			</array>
			<key>Mic Routing Menu</key>
			<array>
				<dict>
					<key>Line</key><string>Select the output path for the Mic input. Choose from Mix, X-F A (left channel), X-F B (right channel) and Mute.</string>
				</dict>
			</array>
			<key>Aux Routing Menu</key>
			<array>
				<dict>
					<key>Line</key><string>Select the output path for the Aux input. Choose from Mix, X-F A (left channel), X-F B (right channel) and Mute.</string>
				</dict>
			</array>
			<key>Mic Cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic Cue[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to send the Mic input to the headphone cue.</string>
				</dict>
			</array>
			<key>Aux Cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux Cue[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to send the Aux input to the headphone cue.</string>
				</dict>
			</array>
			<key>Deck Sync</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Deck Sync[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click Sync to put deck in Beat Sync mode. When in Beat Sync mode, press again to re-sync.</string>
				</dict>
				<dict>
					<key>Line</key><string>If a track has no Beatgrid, Sync will put the deck into Auto Tempo mode. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Blue indicates which decks are currently in Beat Sync mode.</string>
				</dict>
				<dict>
					<key>Line</key><string>Yellow indicates which decks are currently in Tempo Sync/Auto Tempo mode. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Note:[/b] If 'Enable Beatgrids' is disabled in the Setup screen Sync will only put a deck into Auto Tempo mode. </string>
				</dict>
			</array>
			<key>Master Sync</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sync On/Off[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Indicates whether Sync mode is on or off.</string>
				</dict>
			</array>
			<key>Master BPM</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sync Master BPM[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The Sync Master BPM value is what any decks using Sync mode will synchronize to. The Sync Master BPM is taken from the first track on a deck to have Sync mode enabled. To set a new Sync Master BPM, turn off Sync mode on all decks, then load and Sync the new track you wish to set the Sync Master BPM from.</string>
				</dict>
			</array>
			<key>Master Clock</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Clock[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Displays the beat division of the Sync Master BPM.</string>
				</dict>
			</array>
			<key>Effect Select</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect Select[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select an effect to be applied to the current effects slot.</string>
				</dict>
			</array>
			<key>Effect Current</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Current Effect[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The current selected effect applied to the effects slot.</string>
				</dict>
			</array>
			<key>Effect Depth</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect Depth[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Control the amount the selected effect is applied to the audio signal.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When turned to the left the amount is dry (full source audio). Turning to the right increases the depth until the signal is wet (full effected audio).</string>
				</dict>
			</array>
			<key>Effect P2</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect P2 Control[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Control effect parameter P2. This parameter varies depending on your selected effect.</string>
				</dict>
			</array>
			<key>Effect P3</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect P3 Control[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Control effect parameter P3. This parameter varies depending on your selected effect.</string>
				</dict>
			</array>
			<key>Effect Time</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect Time[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Alter the selected effect's time represented as a division of a beat.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Effects are synchronized to the tracks' BPM when a BPM value is available. A value of '1' means a 1 beat cycle. A value of '4' means a 4 beat cycle (or bar) while '1/4' indicates a quarter of a beat (a musical 16th note).</string>
				</dict>
			</array>
			<key>Effect BPM Source</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect BPM Source[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The current BPM source the selected effect uses to calculate effect time.</string>
				</dict>
			</array>
			<key>Effect Cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effect Cue[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Send the effected signal to your PFL CUE to audition the effect in your headphones.</string>
				</dict>
			</array>
			<key>Grid Edit Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enter Grid Edit Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to edit the track's Beat Grid.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When in this mode the following keyboard shortcuts are available:</string>
				</dict>
				<dict>
					<key>Line</key><string>enter| | | |Save and exit Grid Edit Mode.</string>
				</dict>
				<dict>
					<key>Line</key><string>escape| | | |Exit Grid Edit Mode and cancel changes</string>
				</dict>
				<dict>
					<key>Line</key><string>x| | | |Sets a grid marker</string>
				</dict>
				<dict>
					<key>Line</key><string>delete| | | |Deletes a grid marker</string>
				</dict>
				<dict>
					<key>Line</key><string>shift delete| | | |Deletes all grid markers</string>
				</dict>
				<dict>
					<key>Line</key><string>space bar| | | |Create beat grid based on space bar tapping</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Horizontal Waveform Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>left arrow/right arrow| | | |Stretch the beat grid</string>
				</dict>
				<dict>
					<key>Line</key><string>shift left arrow/right arrow| | | |Stretch the beat grid faster</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl left arrow/right arrow| | | |Slip the whole beat grid left or right</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Vertical Waveform Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>up/down arrow| | | |Stretch the beat grid.</string>
				</dict>
				<dict>
					<key>Line</key><string>shift up/down arrow| | | |Stretch the beat grid faster.</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl up/down arrow| | | |Slip the whole beat grid left or right.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>EQ Options</key>
			<array>
				<dict>
					<key>Line</key><string>[b]EQ Options[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select the EQ range to +-6dB or +-12dB.</string>
				</dict>
			</array>
			<key>Crossfader Curve</key>
			<array>
				<dict>
					<key>Line</key><string>[b]C/F Curve[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjusts the crossfader curve.</string>
				</dict>
			</array>
			<key>Upfader Curve</key>
			<array>
				<dict>
					<key>Line</key><string>[b]L/F Curve[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjusts the line fader curve.</string>
				</dict>
			</array>
			<key>Crossfader Options</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Crossfader Options[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select the crossfader style: normal, reverse, or disabled.</string>
				</dict>
			</array>
			<key>Start Review Session</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Start Session[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Start a new history session.</string>
				</dict>
			</array>
			<key>End Review Session</key>
			<array>
				<dict>
					<key>Line</key><string>[b]End Session[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>End the current history session.</string>
				</dict>
			</array>
			<key>Insert Review Entry</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Insert Track[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to manually insert a track into the history list. Use this to enter track information for tracks you have played using other sources i.e. Vinyl, CD or Sample Player.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Mark as Played</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mark Played[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Mark an unplayed track in your history as played. This will show the track in your played history list but will not be displayed as green.</string>
				</dict>
			</array>
			<key>Mark as Unplayed</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mark Unplayed[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Mark a played track in your history as unplayed, removing it from your played history list.</string>
				</dict>
			</array>
			<key>Show Unplayed Tracks</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Show Unplayed Tracks[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Tick this box to show songs which you have prepared but not played in the History. Songs which haven't been played are coloured grey. </string>
				</dict>
			</array>
			<key>Export Review</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Export[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Export session information as a data file. Exported files can be located in the History Export folder contained in your _Serato_ folder. </string>
				</dict>
			</array>
			<key>Key</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Key[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Key tag for the current track.</string>
				</dict>
			</array>
			<key>S1 Power Crossfader Curve</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Power Crossfader Curve Adjustment[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Controls the steepness of the Power crossfader curve (this is when the crossfader curve switch on your hardware is set to the middle position).</string>
				</dict>
			</array>
			<key>S1 Linear Crossfader Curve</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Linear Crossfader Curve Adjustment[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Controls the steepness of the linear crossfader curve (this is when the crossfader curve switch on your hardware is set to the right position).</string>
				</dict>
			</array>
			<key>Slicer Domain</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Slicer Domain[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The length of the Slicer domain in beats. Each slice is one eighth of the domain length.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Slicer Quantization</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Slicer Quantization[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The quantization value displays what size parts each slice is divided into for the trigger quantization grid. For example, a value of 1/2 allows triggering every half slice.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Twitch Loop Range</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Twitch Loop Range[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The current twitch mode loop range e.g. 1/16 - 8.</string>
				</dict>
			</array>
			<key>Sample Player</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Show the sample player panel.</string>
				</dict>
			</array>
			<key>Play Sample</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Play Sample[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use shortcut keys Z, X, C, V, B and N to trigger slots 1-6.</string>
				</dict>
			</array>
			<key>Sample Player Info Display</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Info Display[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Drop samples here to load to the sample player. Press the eject symbol to eject the sample.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>You can also load track from your library to the sample player using the following shortcuts.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 1   ctrl-alt z[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 2   ctrl-alt x[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 3   ctrl-alt c[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 4   ctrl-alt v[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 5   ctrl-alt b[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Slot 6  ctrl-alt n[/b]</string>
				</dict>
			</array>
			<key>Sample Player Repeat Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Repeat Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When the playhead reaches the end of the track it returns and continues from the start of the track.</string>
				</dict>
			</array>
			<key>Sample Player Trigger Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Trigger Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When pressed, the audio plays through until the end of the track. Pressing repetitively will trigger the audio from the beginning of the track. To stop the audio, hold the alt key while either clicking the play button, or pressing the corresponding shortcut key.</string>
				</dict>
			</array>
			<key>Sample Player Hold Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Hold Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The sample plays only while you press and hold the Play button or corresponding shortcut key. Upon release of the play button, the audio stops immediately. </string>
				</dict>
			</array>
			<key>Sample Player Start Stop Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Start Stop Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When play is pressed, the audio plays right through until the end of the track. Pressing play again stops the audio.</string>
				</dict>
			</array>
			<key>Sample Play From Selector</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample &quot;Play From&quot; Selector[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to set where your sample will play from. When set to play from start, or play from a cue point, the sample will play right through until stopped. If a loop is selected, the sample will play until the loop out point.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The number of options will be dependent on the number of cue points and loops already set in your track. i.e if the track loaded has no cue points and loops set, these options will not be available as &quot;play from&quot; points.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Sample Pitch Slider</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Pitch Slider[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the pitch slider to make BPM adjustments. To make fine adjustments, hold shift and drag the slider.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Ctrl - click on the pitch slider to reset the pitch to zero.</string>
				</dict>
			</array>
			<key>SP6 Pitched BPM</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample BPM Display[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Displays the pitched BPM of the track. If the track loaded has no BPM tag, the pitch will be displayed as a percentage.</string>
				</dict>
			</array>
			<key>SP6 Pitch Minus</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Bend / Nudge Down[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to nudge the track into time, adjusting the pitch momentarily.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Ctrl - click to make permanent fine pitch adjustments.</string>
				</dict>
			</array>
			<key>SP6 Pitch Plus</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Bend / Nudge Up[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to nudge the track into time, adjusting the pitch momentarily.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Ctrl - click to make permanent fine pitch adjustments.</string>
				</dict>
			</array>
			<key>Sample Player Slot Output Selec</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Slot Output Select[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Select the output for this sample player slot.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>1 outputs through Channel 1 (Appears as L if you have a two deck ITCH controller)</string>
				</dict>
				<dict>
					<key>Line</key><string>2 outputs through Channel 2 (Appears as R if you have a two deck ITCH controller)</string>
				</dict>
				<dict>
					<key>Line</key><string>3 outputs through Channel 3 (if available on your ITCH hardware)</string>
				</dict>
				<dict>
					<key>Line</key><string>4 outputs through Channel 4 (if available on your ITCH hardware)</string>
				</dict>
				<dict>
					<key>Line</key><string>M outputs through the MASTER output of the ITCH hardware.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>SP6 Master Out</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Individual Sample Master Output Link[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Assigns the individual sample output to match the master SP-6 sample player output. Uncheck the Master button to individually assign a sample slot a specific output.</string>
				</dict>
			</array>
			<key>SP6 Mute</key>
			<array>
				<dict>
					<key>Line</key><string>[b]SP-6 Individual Mute Buttons[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click the mute button to mute this sample player slot.</string>
				</dict>
			</array>
			<key>Sample Player Track Overview</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Track Overview[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Displays the complete overview for the loaded track.</string>
				</dict>
			</array>
			<key>SP6 Level Slider</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Volume Level[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>This controls the volume of the sample, like a channel fader on a DJ mixer.</string>
				</dict>
			</array>
			<key>Sample Player Individual Gain</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Individual Sample Gain[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust to compensate for tracks that are too quiet / loud. This gain value is stored with the file, not the sample slot.</string>
				</dict>
			</array>
			<key>Output Level</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Output level[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the level sent to the hardware, post deck and ITCH master gain.</string>
				</dict>
			</array>
			<key>New Smart Crate</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Create Smart Crate[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to create a new smart crate.</string>
				</dict>
			</array>
			<key>Edit Smart Crate</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Edit Smart Crate[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to edit the selected smart crate.</string>
				</dict>
			</array>
			<key>Night Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Night Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to &quot;Night Mode&quot;.</string>
				</dict>
			</array>
			<key>Day Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Day Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to &quot;Day Mode&quot;</string>
				</dict>
			</array>
			<key>Classic Horizontal Display Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Classic Horizontal Display Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to &quot;Classic Horizontal mode&quot;.</string>
				</dict>
			</array>
			<key>Classic Vertical Dsplay Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Classic Vertical Display Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to &quot;Classic Vertical mode&quot;.</string>
				</dict>
			</array>
			<key>Stack Display Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Stack Display Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to &quot;Stack mode&quot;.</string>
				</dict>
			</array>
			<key>Library Display Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Library Display Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to switch to to &quot;Library mode&quot;.</string>
				</dict>
			</array>
			<key>Simple List</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Simple List[/b]</string>
				</dict>
			</array>
			<key>Album Art List</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Album Art List[/b]</string>
				</dict>
			</array>
			<key>Album Art Grid 1</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Album Art Grid 1[/b]</string>
				</dict>
			</array>
			<key>Album Art Grid 2</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Album Art Grid 2[/b]</string>
				</dict>
			</array>
			<key>Export Format</key>
			<array>
				<dict>
					<key>Line</key><string>[b]History Export Format[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Allows you to select which format you wish to export the highlighted history session as. Choose from:</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Serato Playlists - Export your session as a Serato Playlist on your www.serato.com profile.</string>
				</dict>
				<dict>
					<key>Line</key><string>Text - Export your session as a plain text file.</string>
				</dict>
				<dict>
					<key>Line</key><string>CSV - Export your session as a file for use in spreadsheet software.</string>
				</dict>
				<dict>
					<key>Line</key><string>M3U - Export your session as a playlist which can be imported into most media players.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Effects Panel</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Effects Panel[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to open the effects panel.</string>
				</dict>
			</array>
			<key>Mic/Aux Button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mix/Aux Mixing Panel[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to open Mic and Aux mixing panel. </string>
				</dict>
			</array>
			<key>Aux Input Level Meter</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux Input Level Meter[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the Aux input level from hardware. </string>
				</dict>
			</array>
			<key>Aux Routing Menu</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux Routing Menu[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to select where the Mic / Aux audio signal will be sent.</string>
				</dict>
			</array>
			<key>Recording Panel</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Recording Panel[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to open the recording panel.</string>
				</dict>
			</array>
			<key>CPU Meter</key>
			<array>
				<dict>
					<key>Line</key><string>[b]CPU Meter[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Measures the amount of processing power your computer is currently using.</string>
				</dict>
			</array>
			<key>Markers Up</key>
			<array>
				<dict>
					<key>Line</key><string>Click to scroll up cue point slots.</string>
				</dict>
			</array>
			<key>Markers Down</key>
			<array>
				<dict>
					<key>Line</key><string>Click to scroll down cue point slots.</string>
				</dict>
			</array>
			<key>Mic Input Level Meter</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic Input Level Meter[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shows the Mic input level from hardware. </string>
				</dict>
			</array>
			<key>Mic Cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Mic Cue[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Send Mic output to headphone cue.</string>
				</dict>
			</array>
			<key>Aux Cue</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Aux Cue[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Send Aux output to headphone cue.</string>
				</dict>
			</array>
			<key>SP6 Keylock</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enable Keylock[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>When Keylock is on, the key or pitch of the song stays locked at what it would be if the track was playing at normal speed, regardless of how the fast the track is actually playing.</string>
				</dict>
			</array>
			<key>Sample Player Master Output Sel</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Master Output Select[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the master output select button to choose where you wish to have the SP-6 output audio to.</string>
				</dict>
				<dict>
					<key>Line</key><string>1 outputs through Channel 1 (Appears as L if you have a two deck ITCH controller)</string>
				</dict>
				<dict>
					<key>Line</key><string>2 outputs through Channel 2 (Appears as R if you have a two deck ITCH controller)</string>
				</dict>
				<dict>
					<key>Line</key><string>3 outputs through Channel 3 (if available on your ITCH hardware)</string>
				</dict>
				<dict>
					<key>Line</key><string>4 outputs through Channel 4 (if available on your ITCH hardware)</string>
				</dict>
				<dict>
					<key>Line</key><string>M outputs through the MASTER output of the ITCH hardware.</string>
				</dict>
			</array>
			<key>Sync Off</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sync Off[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Clicking the 'Off' button will disable Sync. </string>
				</dict>
			</array>
			<key>Beat Position Indicator</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Beat Position Indicator[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The Beat Position Indicator is a display of where the track playhead is within the current bar. The playhead will illuminate and move through a 4/4 count in time with the track’s tempo. This indicator will change color depending on the sync state : blue for Beat Sync and yellow for Tempo Sync.</string>
				</dict>
			</array>
			<key>Library Font Size</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Library Font Size[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Adjust the font size of the main library text.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Shortcut       Action</string>
				</dict>
				<dict>
					<key>Line</key><string>Ctrl +       Increase library font size.</string>
				</dict>
				<dict>
					<key>Line</key><string>Ctrl -       Decrease library font size.</string>
				</dict>
			</array>
			<key>Album Art Size</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Album Art Size[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Move slider to the left to decrease the library album art size, and to the right to increase the library album art size. </string>
				</dict>
			</array>
			<key>Enable SP6 Plugin</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enable SP-6 Plugin [/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to enable and disable the use of the SP-6 Sample Player, which can be accessed in the SP-6 panel.</string>
				</dict>
			</array>
			<key>Enable Playlists Plugin</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enable Playlists Plugin [/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to enable and disable the use of Serato Playlists, which can be exported to your serato.com user profile.</string>
				</dict>
			</array>
			<key>Enable Live Playlists</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Enable Live Playlists[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to enable and disable the use of Live Playlists, which can be updated in real time to your serato.com user profile.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Sample Banks</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Banks[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>The SP-6 Sample player has 4 available banks. Click on the A, B, C or D buttons to switch to the corresponding bank. Each bank will save the individual sample and sample slot settings you last used, allowing you to prepare banks for easy recall at a later stage. </string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
			</array>
			<key>Sample Player Gain</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Gain[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Controls the gain level of the sample player.</string>
				</dict>
			</array>
			<key>Sample Player Display Menu</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Display Menu[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Use the drop down menu to select what sample player components are visible. Note that when a component is not visible, it is not deactivated, only hidden from view.</string>
				</dict>
			</array>
			<key>SP6 Master Mute Button</key>
			<array>
				<dict>
					<key>Line</key><string>[b]SP-6 Master Mute Button[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click the SP-6 master mute button to mute all of the sample player slots.</string>
				</dict>
			</array>
			<key>Loop</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Loop[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Press the 'loop' button to turn the current loop on or off. If you hold 'ctrl' when you turn the 'loop' on, the play head will jump to the start of the loop.</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Keyboard Shortcuts[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>[b]Left| |Action| | |Right[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string>[| |loop on/off| | |'</string>
				</dict>
				<dict>
					<key>Line</key><string>ctrl [| |loop on and jump| | |ctrl '</string>
				</dict>
				<dict>
					<key>Line</key><string>| |to start of loop</string>
				</dict>
			</array>
			<key>Sample Player Sync Mode</key>
			<array>
				<dict>
					<key>Line</key><string>[b]Sample Player Sync Mode[/b]</string>
				</dict>
				<dict>
					<key>Line</key><string></string>
				</dict>
				<dict>
					<key>Line</key><string>Click to put sample slot into Beat Sync Mode. This will Sync it to any other sample or deck in Beat Sync mode. If the sample does not have a Beatgrid it will go into Auto Tempo mode. </string>
				</dict>
			</array>
		</dict>
	</dict>
</plist>