SafeKey International Inc.                                   
------------------------------------------------------------------------------

                          - SuperPro Lock Emulator -
-----------
Description:
-----------

This system is designed to emulate your SuperPro lock perfectly.


-------------
Requirements:
-------------

 - Windows 95 or Windows 98
 - you must own and be licensed to use a working SuperPro lock device


---------
Contents:
---------

   SSPRO.VXD        - device driver that emulates the lock
   SSPREAD.COM      - reads your lock device and creates a data file
   README.TXT       - this text file


-------------
Instructions:
-------------

1. Open a DOS prompt

2. Switch to the drive and directory where SSPREAD.COM is located.

   For example: insert the diskette that the emulator came on and type A: in
   the command prompt.

3. With the lock attached, run SSPREAD.COM to read the contents of your lock.

4. A file will be created called PPCB.SSP.

5. Copy the PPCB.SSP file and SSPRO.VXD to your WINDOWS\SYSTEM directory.

   At the command prompt type:

   COPY PPCB.SSP C:\WINDOWS\SYSTEM      <press enter>
   COPY SSPRO.VXD C:\WINDOWS\SYSTEM      <press enter>

6. Add the following line to your SYSTEM.INI file under the [386Enh]
   section header:

   DEVICE=SSPRO.VXD

6. Restart Windows (reboot) for the changes to take effect.
    
-------------
Tech Support:
-------------

Should you have any problems, suggestions or comments, please email us at:

   tech@safe-key.com

We can also be reached at:

   SafeKey International
   6 Ridgeview PL.
   Winnipeg, MB
   R2E 0G3   Canada
   (204) 669-4639



Notes: The file SYSTEM.INI  is located in the Windows directory. This file
can be edited by running SYSEDIT. {START - RUN - SYSEDIT}

